| Error Code |
Name |
Occurrence Conditions |
Cause and Probable Faulty Part |
|
|
|
|
| E02 |
AF
TIME OUT
|
- AF processing did not end within the
specified time.
- The focus lens was not driven.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT (Focus Motor)
|
|
|
|
|
| E03 |
EF
TIME OUT
|
Auto Flash Control did not end within the
specified time.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT (Focus Motor)
|
|
|
|
|
| E09 |
JPEG DMA
TIME OUT
|
JPEG processing did not end within the
specified time.
|
|
|
|
|
|
| E14 |
UNKOWN |
When unkown error, cause of which is
not known, occurs. |
|
|
|
|
|
| E16 |
IMAGING TIME
OUT |
Communications between the CPU
and peripheral ICs did not end within
the specified time during or after
photography in the EVF mode.
|
|
|
|
|
|
| LENS |
ZOOM LENS
ERROR
|
- Feeding out of the lens barrel did not
end within the specified time after the
power was turned ON.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
- Detection of the zoom PI (photointerrupter)
failed.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
The lens barrel is fed out with the lens cap attached
→ Remedy: Remove the lens cap, and
restart the camera.
|
|
|
- The zoom position error was detected.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
Either zoom movement is obstructed
by some external cause, or there was
some unintentional camera zoom
movement.
→Remedy: Restart the camera.
|
|
|
|
|
| E23 |
CF NO SPACE |
When the CF becomes full during
writing of photographed images to CF,
writing is repeatedly performed with
the JPEG compression ratio successively
increased to reduce the size of
the image file until it can be successfully
written to CF. This error occurs
when writing of the JPEG image file
fails after 10 retries at increasingly
higher compression ratios.
* The same applies in the case of the
Micro Drive.
|
|
|
|
|
|
| E24 |
POWER ON
ERROR
|
- The power of the imaging circuit on
the MAIN PCB ASS’Y was not
detected.
|
- MAIN PCB ASS’Y
- DC/DC CONVERTER PCB ASS’Y
|
|
|
- The power of the LCD PCB ASS’Y
was not detected.
|
|
|
|
|
|
| E25 |
FOCUS PI
ERROR
|
Detection of the focus PI (photointerrupter)
failed.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT (Focus Motor)
|
|
|
|
|
| E26 |
CAPTURE
TIME OUT
|
Writing of the photograph image to
SDRAM did not end within the specified
time.
|
|
|
|
|
|
| E27 |
CF WRITE
TIME OVER |
Free area could not be secured in the
buffer for the photograph image within
the specified time in the continuos
shooting mode. |
- MAIN PCB ASS’Y
- CF CARD/MICRO DRIVE
|
|
|
|
|
| E30 |
POWER OFF
ERROR
|
The camera power was turned OFF
while the image was being recorded
to the CF Card/Micro Drive (while the
green LED was blinking). (The error
code is displayed when the camera is
next turned ON.)
* This error may occur after E23.
|
The battery or DC plug was removed
while the image was being recorded to
the CF Card/Micro Drive.
→Remedy: Restart the camera.
|
|
|
|
|
| E50 |
CF FORMAT
ERROR
|
The CF Card/Micro Drive could not be
formatted properly.
|
|
|
|
|
|
| E52 |
QUICK REVIEW
ERROR
|
Review of the photograph image failed. |
|
