| Error Code |
Name |
Occurrence Conditions |
Cause and Probable Faulty Part |
|
|
|
|
| E03 |
EF
TIME OUT
|
EF processing did not end within the
specified time.
|
|
|
|
|
|
| E09 |
JPEG DMA
TIME OUT
|
JPEG processing did not end within the
specified time.
|
|
|
|
|
|
| E11 |
COMMAND
TIME OUT
|
Between Main CPU and Sub CPU,
timeout or communication-error
occurred.
|
|
|
|
|
|
| E16 |
IMAGING TIME
OUT |
Communications between the CPU
and peripheral ICs did not end within
the specified time during or after
photography in the EVF mode.
|
|
|
|
|
|
|
E18
E19
|
ZOOM FOCHS
LENS ERROR
|
Detection of the zoom PI (photointerrupter)
or focus PI failed.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT (PHOTO-INTERRUPTER)
|
|
|
|
|
| E 22 |
CASHE ERROR |
This firmware bug error occurs in data
cache processing. Normally, this error
is unlikely to occur.
|
|
|
|
|
|
| E23 |
CF NO SPACE |
When the CF becomes full during
writing of photographed images to CF,
writing is repeatedly performed with
the JPEG compression ratio successively
increased to reduce the size of
the image file until it can be successfully
written to CF. This error occurs
when writing of the JPEG image file
fails after 10 retries at increasingly
higher compression ratios.
|
|
|
|
|
|
| E24 |
POWER ON
ERROR
|
- The power of the imaging circuit on the MAIN PCB ASS’Y was not detected.
|
- MAIN PCB ASS’Y
- DC/DC PCB ASS'Y
|
| |
|
- The power of the LCD PCB ASS’Y
was not detected.
|
- MAIN PCB ASS'Y
- LCD PCB ASS’Y
- DC/DC PCB ASS'Y
|
|
|
|
|
| E26 |
CAPTURE
TIME OUT
|
Writing of the photograph image to
SDRAM did not end within the specified
time.
|
|
|
|
|
|
| E27 |
CF WRITE
TIME OVER |
Free area could not be secured in the
buffer for the photograph image within
the specified time in the continuos
shooting mode. |
|
| |
|
|
|
| E28 |
IG ERROR |
IG wasn't to set the initial position. |
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
|
|
| E30 |
POWER OFF
ERROR
|
The camera power was turned OFF
while the image was being recorded to
the CF (while the green LED was
blinking). (The error code is displayed
when the camera is next turned ON.)
|
The battery or DC plug was removed
while the image was being recorded to
the CF.
→Remedy: Restart the camera.
|
|
|
|
|
| E50 |
CF FORMAT
ERROR
|
The CF Card/Micro Drive could not be
formatted properly.
|
|
|
|
|
|
| E52 |
QUICK REVIEW
ERROR
|
Review of the photograph image failed. |
|
