| Error Code |
Name |
Occurrence Conditions |
Cause and Probable Faulty Part |
|
|
|
|
| E02 |
AF
TIME OUT
|
- AF processing did not end within the
specified time.
- The focus lens was not driven.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
|
|
| E03 |
EF
TIME OUT
|
Auto Flash Control did not end within the
specified time.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
|
|
| E09 |
JPEG DMA
TIME OUT
|
JPEG processing did not end within the
specified time.
|
|
|
|
|
|
| E14 |
UNKOWN |
When unkown error, cause of which is
not known, occurs. |
|
|
|
|
|
| E16 |
IMAGING TIME
OUT |
When communication between CPU and
peripheral IC is not completed within the
specified time during recording using
EVF or after completion of recording. |
|
|
|
|
|
| E18 |
ZOOM LENS
ERROR
|
Movement of the lens barrel did not end
within the specified time.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
|
|
| E23 |
CF NO SPACE |
When the CF becomes full during writing
of photographed images to CF, writing is
repeatedly performed with the JPEG
compression ratio successively increased
to reduce the size of the image file until it
can be successfully written to CF.
This error occurs when writing of the
JPEG image file fails after 10 retries at
increasingly higher compression ratios.
|
|
|
|
|
|
| E24 |
POWER ON
ERROR
|
The power of the imaging circuit on the
MAIN PCB ASS’Y was not detected.
|
- MAIN PCB ASS’Y
- DC/DC PCB ASS’Y
|
|
|
|
|
| E25 |
FOCUS PI
ERROR
|
Detection of the focus PI (photointerrupter)
failed.
|
- MAIN PCB ASS’Y
- OPTICAL UNIT
|
|
|
|
|
| E26 |
CAPTURE
TIME OUT
|
Writing of the photograph image to
SDRAM did not end within the specified
time.
|
|
|
|
|
|
| E27 |
CF WRITE
TIME OVER |
Free area could not be secured in the
buffer for the photograph image within
the specified time in the continuos
shooting mode. |
|
|
|
|
|
| E30 |
POWER OFF
ERROR
|
The camera power was turned OFF while
the image was being recorded to the CF
Card. (The error code is displayed when
the camera is next turned ON.)
* This error may occur after E23.
|
The battery or DC plug was removed
while the image was being recorded to
the CF Card.
→ Remedy: Restart the camera.
|
|
|
|
|
| E50 |
CF FORMAT
ERROR
|
The CF Card could not be formatted
properly.
|
|
|
|
|
|
| E51 |
CF ACCESS
ERROR |
When image data cannot be read from
CF normally. |
|
|
|
|
|
| E52 |
QUICK REVIEW
ERROR
|
Review of the photograph image failed. |
|
